Icecrypt S4000 HD

[BPanther]

- is it possible to install Polish language pack for OSD/Menu?

Sure, just translate and I'll add the language at the next version.

- picons - how to install and what about download source, is it possible to use/import picons from Hyperion?

The icon format neutrino or e2 (jpg/gif). Because the Flash is r/o, you must have a external storage for using (usb/sata).

Bootloop: The bootargs are wrong -> must be changed for e2 compatible.
Here are the right bootargs (3 lines) for Neutrino/E2 from a AV7000, I don't know if they also on your box works:

Code: Alles auswählen

bootdesc_9=E FLASH
bootcmd_9=run bootargs_9;bootm a0040000
bootargs_9=set bootargs console=ttyAS1,115200 root=/dev/mtdblock2 rw mem=128m ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:AT7000:eth0:off coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=0 nwhwconf=device:eth0,hwaddr:${ethaddr} init=/bin/devinit

[mackowiakp]

OK. "Bootloop: The bootargs are wrong -> must be changed for e2 compatible". Does it means "use AAF Recovery" or can I change it from telnet session?

[mackowiakp]

It is output from which command?

Code: Alles auswählen

bootdesc_9=E FLASH
bootcmd_9=run bootargs_9;bootm a0040000
bootargs_9=set bootargs console=ttyAS1,115200 root=/dev/mtdblock2 rw mem=128m ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:AT7000:eth0:off coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=0 nwhwconf=device:eth0,hwaddr:${ethaddr} init=/bin/devinit

[BPanther]

You can it change by Telnet or also with the . This was an export vom
Or you post all your bootargs exportet with here, and then we can see what we need to change/add.

Maybe morlys tool from HDMU also works, but I have it not currently testet.

[mackowiakp]

My screenshot from Bootargs Editor looks a little bit strange. Satbox is booted from Hyperion 3 (USB)

[mackowiakp]

OK, Now it looks much better. What I have to change?

HYPERION-3:~#
13:02:29-Sending command: /tmp/fw_printenv
13:02:31-Odpowiedź z tunera:
bootdelay=1
baudrate=115200
autoload=n
board=Twin
ethaddr=00:1D:EC:00:12:34
ipaddr=192.168.2.9
netmask=255.255.255.0
hdd=1
mtdargs=set bootargs console=ttyAS1,115200 nwhwconf=device:eth0,hwaddr:${ethaddr} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask} root=/dev/mtdblock3 rootfstype=squashfs bigphysarea=4060 stmmaceth=msglvl:0,watchdog:4000,rxsize:16 loglevel=0
usbargs=set bootargs console=ttyAS1,115200 nwhwconf=device:eth0,hwaddr:${ethaddr} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${board}:eth0:off root=/dev/sd${sdx}${par} rw mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=5 init=/bin/dev
init
sdxconf=if test $hdd -eq 0 -a $usb -eq 0; then set sdx a; elif test $hdd -eq 1 -a $usb -eq 1; then set sdx c; else set sdx b; fi
usbconf=usb reset; sleep 3; run sdxconf; run usbargs
usbload=if fatload usb $usb:1 a5000000 /uImage$par; then; elif ext2load usb $usb:$par a5000000 /boot/uImage; then; fi
backup=erase a0300000 a1ffffff; cp.b a5000000 a0300000 1d00000; run mtdargs; bootm a0300000
usbtool=if fatload usb 0:1 a5000000 /uImage; then bootm a5000000; elif fatload usb 0:1 a5000000 /uBackup_${board}; then run backup; fi; run mtdargs; bootm a0300000
bootcmd=bootmenu $menutimeout $default
bootdesc_0=---Flash---
bootcmd_0=run mtdargs; bootm a0300000
bootdesc_1=--USB1 P1--
bootcmd_1=set usb 0; set par 1; run usbconf; run usbload; bootm a5000000
bootdesc_2=--USB1 P2--
bootcmd_2=set usb 0; set par 2; run usbconf; run usbload; bootm a5000000
bootdesc_3=--USB1 P3--
bootcmd_3=set usb 0; set par 3; run usbconf; run usbload; bootm a5000000
bootdesc_4=--USB1 P4--
bootcmd_4=set usb 0; set par 4; run usbconf; run usbload; bootm a5000000
bootdesc_5=--USB2 P1--
bootcmd_5=set usb 1; set par 1; run usbconf; run usbload; bootm a5000000
bootdesc_6=--USB2 P2--
bootcmd_6=set usb 1; set par 2; run usbconf; run usbload; bootm a5000000
bootdesc_7=--USB2 P3--
bootcmd_7=set usb 1; set par 3; run usbconf; run usbload; bootm a5000000
bootdesc_8=--USB2 P4--
bootcmd_8=set usb 1; set par 4; run usbconf; run usbload; bootm a5000000
bootdesc_9=--USB 112--
bootcmd_9=set usb 0; set par 2; run usbconf; run usbtool
menutimeout=3000
stdin=serial
stdout=serial
stderr=serial
default=2

[mackowiakp]

And whole file of bootloader setup

[DboxOldie]

It seems to me:
The mtdargs= are for flashboot (orig soft)...
Therefore it will be enough to use the string as BPanther wrote : bootargs_9= as mtdargs and it will probably work, if you have flashed.

If it fails:
You told you´re booting Hyperion from USB > therefore then you can restore them to orig args again

[mackowiakp]

Yes, formerly original soft from Octagon was in flash.
And for example bootm is different - now is a0300000. So I think that more changes is necessary

[DboxOldie]

I don´t know this box. but....
On ufs910 there is bootm for mini and maxi U-Boot different, because mini will be startet from orig U-Boot before kernel.
and maxi is a replacement for orig U-Boot > therefore it calls kernel boot address directly.

May be a similar case ?

I really don´t know better you wait for BP if you are unsure.

[mackowiakp]

Icecrypt S4000 is identical to AV7000 (as AAF compatibility list stands). Except unitID, but it is important only for original soft. I changed unitID to Octagon1018 (identical too from the point of view of hardware) and before flashing Neutrino, the latest version of Octasoft was installed in it. Plus MaxiBoot to have possibility to run other software installed on USB mem. All I want is to install and run Neutrino from internal flash. As I wrote I flashed it using flashcp, running Hyperion from USB attached mem.

[mackowiakp]

OK. I just copy/paste entry for bootargs9 form BPhanter post and now I have Neutrino running from internal flash!. Now configuration. So next troubles expected

[BPanther]

Hehe, that's what I expected (ok, hope *g*) with the bootargs so I have post mine.

[mackowiakp]

Yep. But another problem I have. After turn satbox to "deep standby" on turning it on again, tuner does not "catch" signal in most cases. Sometimes channel up/down resolve the situation but the most useful tool is to turn off/on satbox using power switch. "Channel unavailable" in display on the screen and signal indicator is near zero. Of course it in not problem of antenna or similar.
And still I can not set my, previously created channel list as default. Always providers created automatically list a used. Probably it is simple to config but I do not find the way to do it.
Also I have Polish translation of menus, but I don know the author so - i think - can not public it without permission. I try to install file /usr/share/tuxbox/neutrino/locale/polski.locale but it is read onlu=y filesystem so it is impossible to copy.

Any idea how to resolve my problems?

[DboxOldie]

For channel unavailalable :
Try in this case in Telnet the command : pzapit -rz , and tell us if the channel runs then.