Freezing of the picture problem

[maleboya]

Ok, than i habe missundestood The thing with The Emu

but your menu an infobar is still responding during The freezes?

[mackowiakp]

Yes, still responding during The freezes

[maleboya]

Okay, than The hdmi is still in sync. But it only occurs on This tv? Do You habe cec enabled on The tv?

[mackowiakp]

I totally turned off all CEC feature in 55ES8000. The problem does not exits if:
- 1018 is booted from original soft and connected to 55ES8000 via hdmi
- 1018 is booted from USB with Neutrino installed on it and connected to 42C5000 TV set via the same HDMI cable.

[mackowiakp]

By the way. The same situation exist when I play with E2 clones like HDMU, NEBULA and Hyperion. All have - like Neutrino - identical graphic card driver. Of course different GUI, but driver the same.

[DboxOldie]

Yes all use the same Basics, especially the player2....
There are some parts in the souce for using the hdmi, I think your TV model produce a strange Signal when switching off / on, which causes this fault.

You are using neutrino V2 (MP), perhaps there are additional infos in the log by enabling this:

export HAL_DEBUG=0x03

Put this term into the rcS and the log of things depending on "Video" "Audio" shows more.

[mackowiakp]

OK, I will test tomorrow, today I am too tired.

If You be so kind, PM me the link to download EMU, You are using together with Neutrino.

[DboxOldie]

I use os-cam sh4-amino-dvbapi from streamboard

[mackowiakp]

I am going to madness. Now, each time I turn on Neutrino form deep standby mode, the SIG=77%, SNR=0. So each time I have to "scan the sky" to receive any program.
Maybe it is the time to reinstall Neutrino. My ver of Neutrino is the ver suggested me by BPanther aprox week ago.
So my questions are:
- what is today ver with twin tuner support (I am lost right now)
- what is the ver of EMU You suggest/tested to work with

I know, it is not forum dedicated for EMU discussion, but the only info I need (and probably not only me) is is what ver to use. Not how to configure, to play with or so on.

Nevertheless i catch logs with extra line added in to rcS file. I placed the line at the very beginning of the file, just after the comments.

So You have:

fortis:~# setconsole
fortis:~# [zapit] LOST LOCK! stopping video...
[LT:007187b0:video ] Stop(0)
[LT:007187b0:video ] ioctl(fd, VIDEO_STOP, blank ? 1 : 0)
[zapit] reacquired LOCK! starting video...
[LT:007187b0:video ] Start playstate=2
[LT:007187b0:video ] ioctl(fd, VIDEO_SELECT_SOURCE, VIDEO_SOURCE_DEMUX)
[LT:007187b0:video ] ioctl(fd, VIDEO_PLAY)
[zapit] LOST LOCK! stopping video...
[LT:007187b0:video ] Stop(0)
[LT:007187b0:video ] ioctl(fd, VIDEO_STOP, blank ? 1 : 0)
[zapit] reacquired LOCK! starting video...
[LT:007187b0:video ] Start playstate=2
[LT:007187b0:video ] ioctl(fd, VIDEO_SELECT_SOURCE, VIDEO_SOURCE_DEMUX)
[LT:007187b0:video ] ioctl(fd, VIDEO_PLAY)
[zapit] LOST LOCK! stopping video...
[LT:007187b0:video ] Stop(0)
[LT:007187b0:video ] ioctl(fd, VIDEO_STOP, blank ? 1 : 0)
[zapit] reacquired LOCK! starting video...
[LT:007187b0:video ] Start playstate=2
[LT:007187b0:video ] ioctl(fd, VIDEO_SELECT_SOURCE, VIDEO_SOURCE_DEMUX)
[LT:007187b0:video ] ioctl(fd, VIDEO_PLAY)
[zapit] LOST LOCK! stopping video...
[LT:007187b0:video ] Stop(0)
[LT:007187b0:video ] ioctl(fd, VIDEO_STOP, blank ? 1 : 0)
[zapit] reacquired LOCK! starting video...
[LT:007187b0:video ] Start playstate=2

etc, etc, etc......

[DboxOldie]

Very strange...when you always had to make a new scan after deep standby.
I never heard this before....
I use old os versions 6089 and 63xx which works well. Although the newer ones works too, but it makes no sense because they are bigger
and my cards (S02 , HD02 ) are working well with the old versions.

[BPanther]

The Log does not give really infos about the problem except the "lost signal" but not why. :-\

[mackowiakp]

Not good. So I repeat my request to identify the files to make reinstall the software on the USB.

- what is today ver with twin tuner support (I am lost right now)
- what is the ver of EMU You suggest/tested to work with

[BPanther-Mobil]

See the portal, Rev5671 is the current NMP version for multi tuner.

[mackowiakp]

OK, I will reinstall my Neutrino. I know that You dont like to discuss about EMU. But the simple question about. What ver of EMU You suggest. Sorry if I upset you

[BPanther]

I use a the last real version 1.35 of mg-camd. os-cam is build by myself only for smargo reader (no active dvbapi).